1. License

WireProto Specification License

WireProto Specification by Brent Saner is licensed under:

Creative Commons Attribution-ShareAlike 4.0 International

(License in full)
Attribution-ShareAlike 4.0 International

=======================================================================

Creative Commons Corporation ("Creative Commons") is not a law firm and
does not provide legal services or legal advice. Distribution of
Creative Commons public licenses does not create a lawyer-client or
other relationship. Creative Commons makes its licenses and related
information available on an "as-is" basis. Creative Commons gives no
warranties regarding its licenses, any material licensed under their
terms and conditions, or any related information. Creative Commons
disclaims all liability for damages resulting from their use to the
fullest extent possible.

Using Creative Commons Public Licenses

Creative Commons public licenses provide a standard set of terms and
conditions that creators and other rights holders may use to share
original works of authorship and other material subject to copyright
and certain other rights specified in the public license below. The
following considerations are for informational purposes only, are not
exhaustive, and do not form part of our licenses.

     Considerations for licensors: Our public licenses are
     intended for use by those authorized to give the public
     permission to use material in ways otherwise restricted by
     copyright and certain other rights. Our licenses are
     irrevocable. Licensors should read and understand the terms
     and conditions of the license they choose before applying it.
     Licensors should also secure all rights necessary before
     applying our licenses so that the public can reuse the
     material as expected. Licensors should clearly mark any
     material not subject to the license. This includes other CC-
     licensed material, or material used under an exception or
     limitation to copyright. More considerations for licensors:
    wiki.creativecommons.org/Considerations_for_licensors

     Considerations for the public: By using one of our public
     licenses, a licensor grants the public permission to use the
     licensed material under specified terms and conditions. If
     the licensor's permission is not necessary for any reason--for
     example, because of any applicable exception or limitation to
     copyright--then that use is not regulated by the license. Our
     licenses grant only permissions under copyright and certain
     other rights that a licensor has authority to grant. Use of
     the licensed material may still be restricted for other
     reasons, including because others have copyright or other
     rights in the material. A licensor may make special requests,
     such as asking that all changes be marked or described.
     Although not required by our licenses, you are encouraged to
     respect those requests where reasonable. More considerations
     for the public:
    wiki.creativecommons.org/Considerations_for_licensees

=======================================================================

Creative Commons Attribution-ShareAlike 4.0 International Public
License

By exercising the Licensed Rights (defined below), You accept and agree
to be bound by the terms and conditions of this Creative Commons
Attribution-ShareAlike 4.0 International Public License ("Public
License"). To the extent this Public License may be interpreted as a
contract, You are granted the Licensed Rights in consideration of Your
acceptance of these terms and conditions, and the Licensor grants You
such rights in consideration of benefits the Licensor receives from
making the Licensed Material available under these terms and
conditions.


Section 1 -- Definitions.

  a. Adapted Material means material subject to Copyright and Similar
     Rights that is derived from or based upon the Licensed Material
     and in which the Licensed Material is translated, altered,
     arranged, transformed, or otherwise modified in a manner requiring
     permission under the Copyright and Similar Rights held by the
     Licensor. For purposes of this Public License, where the Licensed
     Material is a musical work, performance, or sound recording,
     Adapted Material is always produced where the Licensed Material is
     synched in timed relation with a moving image.

  b. Adapter's License means the license You apply to Your Copyright
     and Similar Rights in Your contributions to Adapted Material in
     accordance with the terms and conditions of this Public License.

  c. BY-SA Compatible License means a license listed at
     creativecommons.org/compatiblelicenses, approved by Creative
     Commons as essentially the equivalent of this Public License.

  d. Copyright and Similar Rights means copyright and/or similar rights
     closely related to copyright including, without limitation,
     performance, broadcast, sound recording, and Sui Generis Database
     Rights, without regard to how the rights are labeled or
     categorized. For purposes of this Public License, the rights
     specified in Section 2(b)(1)-(2) are not Copyright and Similar
     Rights.

  e. Effective Technological Measures means those measures that, in the
     absence of proper authority, may not be circumvented under laws
     fulfilling obligations under Article 11 of the WIPO Copyright
     Treaty adopted on December 20, 1996, and/or similar international
     agreements.

  f. Exceptions and Limitations means fair use, fair dealing, and/or
     any other exception or limitation to Copyright and Similar Rights
     that applies to Your use of the Licensed Material.

  g. License Elements means the license attributes listed in the name
     of a Creative Commons Public License. The License Elements of this
     Public License are Attribution and ShareAlike.

  h. Licensed Material means the artistic or literary work, database,
     or other material to which the Licensor applied this Public
     License.

  i. Licensed Rights means the rights granted to You subject to the
     terms and conditions of this Public License, which are limited to
     all Copyright and Similar Rights that apply to Your use of the
     Licensed Material and that the Licensor has authority to license.

  j. Licensor means the individual(s) or entity(ies) granting rights
     under this Public License.

  k. Share means to provide material to the public by any means or
     process that requires permission under the Licensed Rights, such
     as reproduction, public display, public performance, distribution,
     dissemination, communication, or importation, and to make material
     available to the public including in ways that members of the
     public may access the material from a place and at a time
     individually chosen by them.

  l. Sui Generis Database Rights means rights other than copyright
     resulting from Directive 96/9/EC of the European Parliament and of
     the Council of 11 March 1996 on the legal protection of databases,
     as amended and/or succeeded, as well as other essentially
     equivalent rights anywhere in the world.

  m. You means the individual or entity exercising the Licensed Rights
     under this Public License. Your has a corresponding meaning.


Section 2 -- Scope.

  a. License grant.

       1. Subject to the terms and conditions of this Public License,
          the Licensor hereby grants You a worldwide, royalty-free,
          non-sublicensable, non-exclusive, irrevocable license to
          exercise the Licensed Rights in the Licensed Material to:

            a. reproduce and Share the Licensed Material, in whole or
               in part; and

            b. produce, reproduce, and Share Adapted Material.

       2. Exceptions and Limitations. For the avoidance of doubt, where
          Exceptions and Limitations apply to Your use, this Public
          License does not apply, and You do not need to comply with
          its terms and conditions.

       3. Term. The term of this Public License is specified in Section
          6(a).

       4. Media and formats; technical modifications allowed. The
          Licensor authorizes You to exercise the Licensed Rights in
          all media and formats whether now known or hereafter created,
          and to make technical modifications necessary to do so. The
          Licensor waives and/or agrees not to assert any right or
          authority to forbid You from making technical modifications
          necessary to exercise the Licensed Rights, including
          technical modifications necessary to circumvent Effective
          Technological Measures. For purposes of this Public License,
          simply making modifications authorized by this Section 2(a)
          (4) never produces Adapted Material.

       5. Downstream recipients.

            a. Offer from the Licensor -- Licensed Material. Every
               recipient of the Licensed Material automatically
               receives an offer from the Licensor to exercise the
               Licensed Rights under the terms and conditions of this
               Public License.

            b. Additional offer from the Licensor -- Adapted Material.
               Every recipient of Adapted Material from You
               automatically receives an offer from the Licensor to
               exercise the Licensed Rights in the Adapted Material
               under the conditions of the Adapter's License You apply.

            c. No downstream restrictions. You may not offer or impose
               any additional or different terms or conditions on, or
               apply any Effective Technological Measures to, the
               Licensed Material if doing so restricts exercise of the
               Licensed Rights by any recipient of the Licensed
               Material.

       6. No endorsement. Nothing in this Public License constitutes or
          may be construed as permission to assert or imply that You
          are, or that Your use of the Licensed Material is, connected
          with, or sponsored, endorsed, or granted official status by,
          the Licensor or others designated to receive attribution as
          provided in Section 3(a)(1)(A)(i).

  b. Other rights.

       1. Moral rights, such as the right of integrity, are not
          licensed under this Public License, nor are publicity,
          privacy, and/or other similar personality rights; however, to
          the extent possible, the Licensor waives and/or agrees not to
          assert any such rights held by the Licensor to the limited
          extent necessary to allow You to exercise the Licensed
          Rights, but not otherwise.

       2. Patent and trademark rights are not licensed under this
          Public License.

       3. To the extent possible, the Licensor waives any right to
          collect royalties from You for the exercise of the Licensed
          Rights, whether directly or through a collecting society
          under any voluntary or waivable statutory or compulsory
          licensing scheme. In all other cases the Licensor expressly
          reserves any right to collect such royalties.


Section 3 -- License Conditions.

Your exercise of the Licensed Rights is expressly made subject to the
following conditions.

  a. Attribution.

       1. If You Share the Licensed Material (including in modified
          form), You must:

            a. retain the following if it is supplied by the Licensor
               with the Licensed Material:

                 i. identification of the creator(s) of the Licensed
                    Material and any others designated to receive
                    attribution, in any reasonable manner requested by
                    the Licensor (including by pseudonym if
                    designated);

                ii. a copyright notice;

               iii. a notice that refers to this Public License;

                iv. a notice that refers to the disclaimer of
                    warranties;

                 v. a URI or hyperlink to the Licensed Material to the
                    extent reasonably practicable;

            b. indicate if You modified the Licensed Material and
               retain an indication of any previous modifications; and

            c. indicate the Licensed Material is licensed under this
               Public License, and include the text of, or the URI or
               hyperlink to, this Public License.

       2. You may satisfy the conditions in Section 3(a)(1) in any
          reasonable manner based on the medium, means, and context in
          which You Share the Licensed Material. For example, it may be
          reasonable to satisfy the conditions by providing a URI or
          hyperlink to a resource that includes the required
          information.

       3. If requested by the Licensor, You must remove any of the
          information required by Section 3(a)(1)(A) to the extent
          reasonably practicable.

  b. ShareAlike.

     In addition to the conditions in Section 3(a), if You Share
     Adapted Material You produce, the following conditions also apply.

       1. The Adapter's License You apply must be a Creative Commons
          license with the same License Elements, this version or
          later, or a BY-SA Compatible License.

       2. You must include the text of, or the URI or hyperlink to, the
          Adapter's License You apply. You may satisfy this condition
          in any reasonable manner based on the medium, means, and
          context in which You Share Adapted Material.

       3. You may not offer or impose any additional or different terms
          or conditions on, or apply any Effective Technological
          Measures to, Adapted Material that restrict exercise of the
          rights granted under the Adapter's License You apply.


Section 4 -- Sui Generis Database Rights.

Where the Licensed Rights include Sui Generis Database Rights that
apply to Your use of the Licensed Material:

  a. for the avoidance of doubt, Section 2(a)(1) grants You the right
     to extract, reuse, reproduce, and Share all or a substantial
     portion of the contents of the database;

  b. if You include all or a substantial portion of the database
     contents in a database in which You have Sui Generis Database
     Rights, then the database in which You have Sui Generis Database
     Rights (but not its individual contents) is Adapted Material,
     including for purposes of Section 3(b); and

  c. You must comply with the conditions in Section 3(a) if You Share
     all or a substantial portion of the contents of the database.

For the avoidance of doubt, this Section 4 supplements and does not
replace Your obligations under this Public License where the Licensed
Rights include other Copyright and Similar Rights.


Section 5 -- Disclaimer of Warranties and Limitation of Liability.

  a. UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE
     EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS
     AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF
     ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS,
     IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION,
     WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR
     PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS,
     ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT
     KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT
     ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.

  b. TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE
     TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION,
     NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT,
     INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES,
     COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR
     USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN
     ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR
     DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR
     IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.

  c. The disclaimer of warranties and limitation of liability provided
     above shall be interpreted in a manner that, to the extent
     possible, most closely approximates an absolute disclaimer and
     waiver of all liability.


Section 6 -- Term and Termination.

  a. This Public License applies for the term of the Copyright and
     Similar Rights licensed here. However, if You fail to comply with
     this Public License, then Your rights under this Public License
     terminate automatically.

  b. Where Your right to use the Licensed Material has terminated under
     Section 6(a), it reinstates:

       1. automatically as of the date the violation is cured, provided
          it is cured within 30 days of Your discovery of the
          violation; or

       2. upon express reinstatement by the Licensor.

     For the avoidance of doubt, this Section 6(b) does not affect any
     right the Licensor may have to seek remedies for Your violations
     of this Public License.

  c. For the avoidance of doubt, the Licensor may also offer the
     Licensed Material under separate terms or conditions or stop
     distributing the Licensed Material at any time; however, doing so
     will not terminate this Public License.

  d. Sections 1, 5, 6, 7, and 8 survive termination of this Public
     License.


Section 7 -- Other Terms and Conditions.

  a. The Licensor shall not be bound by any additional or different
     terms or conditions communicated by You unless expressly agreed.

  b. Any arrangements, understandings, or agreements regarding the
     Licensed Material not stated herein are separate from and
     independent of the terms and conditions of this Public License.


Section 8 -- Interpretation.

  a. For the avoidance of doubt, this Public License does not, and
     shall not be interpreted to, reduce, limit, restrict, or impose
     conditions on any use of the Licensed Material that could lawfully
     be made without permission under this Public License.

  b. To the extent possible, if any provision of this Public License is
     deemed unenforceable, it shall be automatically reformed to the
     minimum extent necessary to make it enforceable. If the provision
     cannot be reformed, it shall be severed from this Public License
     without affecting the enforceability of the remaining terms and
     conditions.

  c. No term or condition of this Public License will be waived and no
     failure to comply consented to unless expressly agreed to by the
     Licensor.

  d. Nothing in this Public License constitutes or may be interpreted
     as a limitation upon, or waiver of, any privileges and immunities
     that apply to the Licensor or You, including from the legal
     processes of any jurisdiction or authority.


=======================================================================

Creative Commons is not a party to its public
licenses. Notwithstanding, Creative Commons may elect to apply one of
its public licenses to material it publishes and in those instances
will be considered the “Licensor.” The text of the Creative Commons
public licenses is dedicated to the public domain under the CC0 Public
Domain Dedication. Except for the limited purpose of indicating that
material is shared under a Creative Commons public license or as
otherwise permitted by the Creative Commons policies published at
creativecommons.org/policies, Creative Commons does not authorize the
use of the trademark "Creative Commons" or any other trademark or logo
of Creative Commons without its prior written consent including,
without limitation, in connection with any unauthorized modifications
to any of its public licenses or any other arrangements,
understandings, or agreements concerning use of licensed material. For
the avoidance of doubt, this paragraph does not form part of the
public licenses.

Creative Commons may be contacted at creativecommons.org.

In a nutshell, this means any may:

  • Use it in commercial/proprietary/internal works…​

  • Expand upon/change the specification…​

    • (As long as it is released under the same Creative Commons license)

As long as you attribute the original (this document). This can be as simple as something like:

Based on WireProto version <protocol version> as found at https://wireproto.io/.

More details certainly helps, though; you may want to mention the exact date you "forked" it, etc.

Please see the full text as collapsed above or the online version of the license for full legal copy.

Note
In the event of the embedded text in this document differing from the online version, the online version is assumed to take precedence as the valid license applicable to this work.

2. Protocol

The WireProto data packing API is a custom wire protocol//message format designed for incredibly performant, unambiguous, predictable, platform-agnostic, implementation-agnostic communication. It is based heavily on the OpenSSH "v1" key format (example/details via sshref.dev) packing method.

It supports arbitrary binary values, which means they can be anything according to the implementation-specific details; a common practice is to encode ("marshal") a Go struct to JSON bytes, and set that as a WireProto field’s value.

It supports both static construction/parsing/dissection and stream approaches in a single format, as well as multiple commands per request message/multiple answers per response message.

All packed uint32 (unsigned 32-bit integer) values are a big-endian 4-byte sequence (e.g. 3712599402 == 0xdd49c56a, or [0xdd, 0x49, 0xc5, 0x6a]).

This specification’s Protocol Version is 1 (0x00000001).

For other releases/finalized versions of this specification, see here.

For in-development versions, drafts, etc. of this specification, see here.

2.1. Requests/Responses

WireProto indicates two types of Messages/communication ends: a Requester (Requesting End) and a Responder (Responding End).

This terminology is intentionally implementation-agnostic. A Requester is any end of a communication that is requesting data, and the Responder is any end of a communication that is providing that data. A Responder may not always be present (e.g. in the case of using WireProto for local disk serialization/caching, etc.), and a "client" may be a Requester, Responder, or both — likewise for a "server".

2.2. Reference Library

The WireProto specification is accompanied by a reference library for Golang, "WireProto" (source):



Go Reference

Additional reference libraries may be available in the future.

2.3. Why Yet Another Message Format?

Because existing methods of serializing data in a structured way (e.g. JSON, XML, YAML) are slow/bloaty, inaccurate, and/or inflexible. They struggle with binary or abritrary data (or in e.g. XML’s case requiring intermediate conditional encoding/decoding).

If it can be represented as bytes (which all digital data can), WireProto can send and receive it.

Additionally:

  • Protobuf has performance issues (yes, really; protobufs have large overhead compared to WireProto) and is restrictive on data types for future-proofing.

  • Gob is very language-limiting and does not support e.g. nil pointers and cyclical values.

  • Cap’n Proto has wide language support and excellent performance but is terribly non-idiomatic, requiring the code to be generated from the schema and not vice versa (which is only ideal if you have only one communication interface and is, in the author’s opinion, the entirely incorrect approach).

  • JSON streams have no delimiters defined which makes it an inconvenience if using a parser that does not know when the message ends/is complete, or if it is expecting a standalone JSON object (e.g. native vanilla Golang JSON parsing).

Tip

WireProto is only used for binary packing/unpacking; this means it can be used with any e.g. net.Conn (and even has helper functions explicitly to facilitate this), storage on-disk, etc.

See the Reference Library for details.

3. Message Format

Tip

Throughout this document, you may see references to things like LF, SOH, and so forth.

These refer to ASCII control characters. You will also see many values represented in hex.

You can find more details about this (along with a full ASCII reference) at asciiref.dev. Note that the specification fully supports UTF-8 (or any other arbitrary encoding) — just be sure that your size allocators are aligned to the byte count and not character count (as these may not be equal depending on encoding).

Each message is composed of:

3.1. Response Status

For response messages, a speciall "summary byte" is prepended; a status indicator. This allows requesting ends to quickly bail in the case of an error if no further parsing is desired.

The status will be indicated by one of two values: an ASCII ACK (0x06) for all requests being returned successfully or an ASCII NAK (0x15) if one or more errors were encountered across all records.

3.2. Protocol Version

The protocol version is a packed uint32 that denotes which version of this protocol specification is being used.

It is maintained seperately from the library version/repo tags.

The current protocol version (as demonstrated in this document) is 1 (0x00000001).

Note
Version 0 is reserved for current HEAD of the master branch of this specification and should be considered experimental, not conforming to any specific protocol message format version.

3.3. Record Group

A record group contains multiple related Records. It is common to only have a single Record Group.

Its structure is:

3.3.1. Record

A record contains multiple related Field/Value Pairs (FVP) and, if a Response Record, a copy of the original reference Request Record it is responding to.

Its structure is:

3.3.1.1. Field/Value Pair (Key/Value Pair)

A field/value pair (also referred to as a key/value pair) contains a matched Field Name and its Field Value.

Its structure is:

Important

Unlike most/all other Allocators for other sections/levels, the field name and value allocators are consecutive Size Allocators! This is because there is only one field name and value per Record.

3.3.1.1.1. Field Name

The field name is usually from a finite set of allowed names. The Field Value, while written as bytes, often contains data defined by the field name. (That is, the parsing of Field Value often depends on its Field Name.) It is recommended that the field name be a UTF-8-compatible string for simplified serializing and on-the-wire debugging.

While there is no technical requirement that a field name be unique per-Record, it is generally recommended (unless emulating/encoding arrays of data in separate field/value pairs).

Its structure is:

  1. A name/identifier in bytes

3.3.1.1.2. Field Value

A field’s value is, on the wire, just a series of bytes. The actual content of those bytes, including any structure or encoding, is likely to/probably depends on the paired Field Name.

Its structure is:

  1. A value in bytes

3.3.1.2. Copy of Original Record

This contains a "copy" of the original/request’s Record that this record is in response to. It is only present in Response message and must not be included in Request messages.

It is a complete Record from the request embedded inside the responding Record.

For example, if a record contains multiple field/value pairs specifying a query of some data then the response record will contain a copy of that record’s query data.

Note

While not recommended, it is within specification/permissible to "alias" a request record via a session-unique identifier (e.g. UUIDv4), provided the promise that the requesting end retains an identifiable copy of/can lookup or associate its original record based on that identifying alias.

For example, a requesting end may specify its own provided identifier as an field/value pair (e.g. identifier:f18231973d08417e877dd1a2f8e8ab74) along with additional data. The returning Response Record may then include only an original/request record with an FVP of identifier:f18231973d08417e877dd1a2f8e8ab74 along with the requested data.

Alternatively for another example, a responding end may return a Response Record with an original/request record of a single FVP such as ref_id:46823da27f8749df9dee8f0bded8cce9 or the like. The requesting end must then be able to retrieve the full copy of the original request record as a standalone Response Record based on that ref_id. Responding ends may enforce lifetimes for request record lookup in this case but they must be promised.

4. Checksums

Checksums are optional for the requesting end but the responding end must send them. If present in the request, the responder must validate to ensure the checksum matches the message body (BODYSTART Header Prefix to BODYEND Sequence, inclusive). If the checksum does not match, an error must be returned.

They are represented as a big-endian-packed uint32.

The checksum must be prefixed with a CKSUM Header Prefix. If no checksum is provided in a request, this prefix must not be included in the sequence.

Tip

A responder can quickly check if a checksum is present by checking the first byte in requests. If it is CKSUM, a checksum is provided. If it is MSGSTART, one was not provided.

The checksum method used is the IEEE 802.3 CRC-32, which should be natively available for all/most implementations/languages as it is perhaps the most ubiquitous of CRC-32 variants (e.g. Python, Golang, GNU C/glibc(?), Rust, etc.). (Polynomial 0x04c11db7, reversed polynomial 0xedb88320.)

If one needs to implement the appropriate CRC32 implementation, there is extensive detail at the CRC Wikipedia article.

To confirm the correct CRC32 implementation is being used (as there are many "CRC-32" algorithms/methods/functions/libraries), the following validations may be used:

Table 1. CRC-32 Validations
String Bytes Checksum (integer) Checksum (bytes, little-endian) Checksum (bytes, big-endian)

WireProto

0x5769726550726f746f

815806352

0x30a03790

0x9037a030

FooBarBazQuux

0x466f6f42617242617a51757578

983022564

0xe4bb973a

0x3a97bbe4

0123456789abcdef

0x30313233343536373839616263646566

1757737011

0x33f0c468

0x68c4f033

5. Headers

Certain sections are wrapped with an identifying header. Those headers are included below for reference.

5.1. RESPSTART Indicator

Responses have a Response Status.[1]

It is either an ACK (0x06) or NAK (0x15).

5.2. CKSUM Header Prefix

A checksum, if provided[2][3], will have a prefix header of ESC (0x1b).

5.3. MSGSTART Header Prefix

The message start header indicates a start of a "message". It is used to delineate operational headers from specification information (e.g. Protocol Version) and data.

It is an SOH (0x01).

5.4. BODYSTART Header Prefix

The body start header indicates that data/records follow. All bytes between BODYSTART and BODYEND are to be assumed to be directly pertinent to the request/response rather than operational.

It is an STX (0x02).

5.5. BODYEND Sequence

The body end prefix indicates the end of data/records. All bytes between BODYSTART and BODYEND are to be assumed to be directly pertinent to the request/response rather than operational.

It is an ETX (0x03).

5.6. MSGEND Sequence

The message end prefix indicates that a message in its entirety has ended, and if no further communication is necessary per implementation the connection may be disconnected.

It is an EOT (0x04).

6. Allocators

There are two type of allocators included for each following sequence of bytes: count allocators and size allocators.

Size allocators can be used by receiving ends to efficiently pre-allocate buffers and for sending ends to indicate the amount of remaining data expected.

They are usually preceded with a count allocator to allow for pre-allocating e.g. slice/array sizes, but not always (e.g. field/value pairs have two size allocators).

All allocators are unsigned 32-bit integers, big-endian-packed.

6.1. Count Allocator

Count allocators indicate how many children objects are contained.

6.2. Size Allocator

Size allocators indicate how much (in bytes) all children objects are combined as one block. They include the allocators themselves of child objects, etc. as well.

7. Reference Model and Examples

For a more visual explanation, given the following e.g. Golang structs from the Reference Library (wireproto.Request{} and wireproto.Response{}):

7.1. Single/Simple

7.1.1. Single/Simple Request

Example Message Structure (Simple Request)
package wireproto

var (
	// REQUEST (Simple)
	testSimpleReq *Request = &Request{
		ProtocolVersion: ProtoVersion,
		RecordGroups: []*RequestRecordGroup{
			&RequestRecordGroup{
				Records: []*RequestRecord{
					&RequestRecord{
						Pairs: []*FieldValuePair{
							&FieldValuePair{
								Name:  []byte("field1"),
								Value: []byte("value1"),
							},
							&FieldValuePair{
								Name:  []byte("field2"),
								Value: []byte("value2"),
							},
						},
					},
				},
			},
		},
	}
)

Would then serialize as (in hex):

Annotated Hex
// REQUEST (Simple)
--------   // (No Checksum Present)
01         // HDR:MSGSTART
00000001   // Protocol Version   (1)
02         // HDR:BODYSTART
00000001   // Record Group Count (1)
00000038   // Record Groups Size (56)
// Record Group 1 (56 bytes)
	00000001   // Record Count      (1)
	00000030   // Record Group Size (48)
	// Record Group 1, Record 1 (48 bytes)
		00000002   // Field/Value Count (2)
		00000028   // Record Size       (40)
		// Record Group 1, Record 1, Field/Value 1 (20 bytes)
			00000006       // Field Name Size  (6)
			00000006       // Field Value Size (6)
			6669656c6431   // "field1"
			76616c756531   // "value1"
		// Record Group 1, Record 1, Field/Value 2 (20 bytes)
			00000006       // Field Name Size  (6)
			00000006       // Field Value Size (6)
			6669656c6432   // "field2"
			76616c756532   // "value2"
03   // HDR:BODYEND
04   // HDR:MSGEND

Or, non-annotated:

01000000010200000001000000380000000100000030000000020000002800000006000000066669
656c643176616c75653100000006000000066669656c643276616c7565320304

7.1.2. Single/Simple Response

Example Message Structure (Simple Response)
package wireproto

var (
	// RESPONSE (Simple)
	testSimpleResp *Response = &Response{
		Status:          AsciiACK,
		Checksum:        3472688928, // 0xcefd0720
		ProtocolVersion: ProtoVersion,
		RecordGroups: []*ResponseRecordGroup{
			&ResponseRecordGroup{
				Records: []*ResponseRecord{
					&ResponseRecord{
						Pairs: []*FieldValuePair{
							&FieldValuePair{
								Name:  []byte("data1"),
								Value: []byte("<arbitrary data>"),
							},
						},
						OriginalRecord: testSimpleReq.RecordGroups[0].Records[0],
					},
				},
			},
		},
	}
)

Would then serialize as (in hex):

Annotated Hex
// RESPONSE (Simple)
06         // HDR:RESPSTART      (Status: OK)
1b         // HDR:CKSUM
cefd0720   // Checksum Value     (3472688928)
01         // HDR:MSGSTART
00000001   // Protocol Version   (1)
02         // HDR:BODYSTART
00000001   // Record Group Count (1)
00000061   // Record Groups Size (97)
// Record Group 1 (97)
	00000001   // Record Count      (1)
	00000059   // Record Group Size (89)
	// Record Group 1, Record 1 (89 bytes)
		00000001   // Field/Value Count   (1)
		0000001d   // Record Size         (29)
		00000030   // Request Record Size (48)
		// Record Group 1, Record 1, Field/Value 1 (29 bytes)
			00000005                   // Field Name Size  (5)
			00000010                   // Field Value Size (16)
			6461746131                 // "data1"
			3c6172626974726172792064   // "<arbitrary data>"
			6174613e
		// Record Group 1, Record 1 (REQUEST RECORD) (48 bytes)
			00000002   // Field/Value Count (2)
			00000028   // Record Size       (40)
			// Record Group 1, Record 1, Field/Value 1 (20 bytes)
				00000006       // Field Name Size  (6)
				00000006       // Field Value Size (6)
				6669656c6431   // "field1"
				76616c756531   // "value1"
			// Record Group 1, Record 1, Field/Value 2 (20 bytes)
				00000006       // Field Name Size  (6)
				00000006       // Field Value Size (6)
				6669656c6432   // "field2"
				76616c756532   // "value2"
03   // HDR:BODYEND
04   // HDR:MSGEND

Or, non-annotated:

061bcefd072001000000010200000001000000610000000100000059000000010000001d00000030
000000050000001064617461313c61726269747261727920646174613e0000000200000028000000
06000000066669656c643176616c75653100000006000000066669656c643276616c7565320304

7.2. Multiple/Many/Complex

Multiple records, record groups, etc. can be specified in one message.

7.2.1. Complex Request

Example Message Structure (Multiple/Many Requests, Single Message)
package wireproto

var (
	// REQUEST (Complex)
	testMultiReq *Request = &Request{
		ProtocolVersion: ProtoVersion,
		RecordGroups: []*RequestRecordGroup{
			&RequestRecordGroup{
				Records: []*RequestRecord{
					&RequestRecord{
						Pairs: []*FieldValuePair{
							&FieldValuePair{
								Name:  []byte("fieldA1A"),
								Value: []byte("valueA1A"),
							},
							&FieldValuePair{
								Name:  []byte("fieldA1B"),
								Value: []byte("valueA1B"),
							},
						},
					},
					&RequestRecord{
						Pairs: []*FieldValuePair{
							&FieldValuePair{
								Name:  []byte("fieldA2A"),
								Value: []byte("valueA2A"),
							},
							&FieldValuePair{
								Name:  []byte("fieldA2B"),
								Value: []byte("valueA2B"),
							},
						},
					},
				},
			},
			&RequestRecordGroup{
				Records: []*RequestRecord{
					&RequestRecord{
						Pairs: []*FieldValuePair{
							&FieldValuePair{
								Name:  []byte("fieldB1A"),
								Value: []byte("valueB1A"),
							},
							&FieldValuePair{
								Name:  []byte("fieldB1B"),
								Value: []byte("valueB1B"),
							},
						},
					},
					&RequestRecord{
						Pairs: []*FieldValuePair{
							&FieldValuePair{
								Name:  []byte("fieldB2A"),
								Value: []byte("valueB2A"),
							},
							&FieldValuePair{
								Name:  []byte("fieldB2B"),
								Value: []byte("valueB2B"),
							},
						},
					},
				},
			},
		},
	}
)

Would then serialize as (in hex):

Annotated Hex
// REQUEST (Complex)
--------   // (No Checksum Present)
01         // HDR:MSGSTART
00000001   // Protocol Version   (1)
02         // HDR:BODYSTART
00000002   // Record Group Count (2)
000000f0   // Record Groups Size (240)
// Record Group 1 (120 bytes)
	00000002   // Record Count      (2)
	00000070   // Record Group Size (112)
	// Record Group 1, Record 1 (56 bytes)
		00000002   // Field/Value Count (2)
		00000030   // Record Size       (48)
		// Record Group 1, Record 1, Field/Value 1 (24 bytes)
			00000008           // Field Name Size  (8)
			00000008           // Field Value Size (8)
			6669656c64413141   // "fieldA1A"
			76616c7565413141   // "valueA1A"
		// Record Group 1, Record 1, Field/Value 2 (24 bytes)
			00000008           // Field Name Size  (8)
			00000008           // Field Value Size (8)
			6669656c64413142   // "fieldA1B"
			76616c7565413142   // "valueA1B"
	// Record Group 1, Record 2 (56 bytes)
		00000002   // Field/Value Count (2)
		00000030   // Record Size       (48)
		// Record Group 1, Record 2, Field/Value 1 (24 bytes)
			00000008           // Field Name Size  (8)
			00000008           // Field Value Size (8)
			6669656c64413241   // "fieldA2A"
			76616c7565413241   // "valueA2A"
		// Record Group 1, Record 2, Field/Value 2 (24 bytes)
			00000008           // Field Name Size  (8)
			00000008           // Field Value Size (8)
			6669656c64413242   // "fieldA2B"
			76616c7565413242   // "valueA2B"
// Record Group 2 (120 bytes)
	00000002   // Record Count      (2)
	00000070   // Record Group Size (112)
	// Record Group 2, Record 1 (56 bytes)
		00000002   // Field/Value Count (2)
		00000030   // Record Size       (48)
		// Record Group 2, Record 1, Field/Value 1 (24 bytes)
			00000008           // Field Name Size  (8)
			00000008           // Field Value Size (8)
			6669656c64423141   // "fieldB1A"
			76616c7565423141   // "valueB1A"
		// Record Group 2, Record 1, Field/Value 2 (24 bytes)
			00000008           // Field Name Size  (8)
			00000008           // Field Value Size (8)
			6669656c64423142   // "fieldB1B"
			76616c7565423142   // "valueB1B"
	// Record Group 2, Record 2 (56 bytes)
		00000002   // Field/Value Count (2)
		00000030   // Record Size       (48)
		// Record Group 2, Record 2, Field/Value 1 (24 bytes)
			00000008           // Field Name Size  (8)
			00000008           // Field Value Size (8)
			6669656c64423241   // "fieldB2A"
			76616c7565423241   // "valueB2A"
		// Record Group 2, Record 2, Field/Value 2 (24 bytes)
			00000008           // Field Name Size  (8)
			00000008           // Field Value Size (8)
			6669656c64423242   // "fieldB2B"
			76616c7565423242   // "valueB2B"
03   // HDR:BODYEND
04   // HDR:MSGEND

Or, non-annotated:

01000000010200000002000000f00000000200000070000000020000003000000008000000086669
656c6441314176616c756541314100000008000000086669656c6441314276616c75654131420000
00020000003000000008000000086669656c6441324176616c756541324100000008000000086669
656c6441324276616c75654132420000000200000070000000020000003000000008000000086669
656c6442314176616c756542314100000008000000086669656c6442314276616c75654231420000
00020000003000000008000000086669656c6442324176616c756542324100000008000000086669
656c6442324276616c75654232420304

7.2.2. Complex Response

Example Message Structure (Response to Multiple/Many Requests, Single Message)
package wireproto

var (
	// RESPONSE (Complex)
	testMultiResp *Response = &Response{
		Status:          AsciiACK,
		Checksum:        2928197330, // 0xae88bed2
		ProtocolVersion: ProtoVersion,
		RecordGroups: []*ResponseRecordGroup{
			&ResponseRecordGroup{
				Records: []*ResponseRecord{
					&ResponseRecord{
						Pairs: []*FieldValuePair{
							&FieldValuePair{
								Name:  []byte("dataA1"),
								Value: []byte("<arbitrary data>"),
							},
						},
						OriginalRecord: testMultiReq.RecordGroups[0].Records[0],
					},
					&ResponseRecord{
						Pairs: []*FieldValuePair{
							&FieldValuePair{
								Name:  []byte("dataA2"),
								Value: []byte("<arbitrary data>"),
							},
						},
						OriginalRecord: testMultiReq.RecordGroups[0].Records[1],
					},
				},
			},
			&ResponseRecordGroup{
				Records: []*ResponseRecord{
					&ResponseRecord{
						Pairs: []*FieldValuePair{
							&FieldValuePair{
								Name:  []byte("dataB1"),
								Value: []byte("<arbitrary data>"),
							},
						},
						OriginalRecord: testMultiReq.RecordGroups[1].Records[0],
					},
					&ResponseRecord{
						Pairs: []*FieldValuePair{
							&FieldValuePair{
								Name:  []byte("dataB2"),
								Value: []byte("<arbitrary data>"),
							},
						},
						OriginalRecord: testMultiReq.RecordGroups[1].Records[1],
					},
				},
			},
		},
	}
)

Would then serialize as (in hex):

Annotated Hex
// RESPONSE (Complex)
06         // HDR:RESPSTART      (Status: OK)
1b         // HDR:CKSUM
ae88bed2   // Checksum Value     (2928197330)
01         // HDR:MSGSTART
00000001   // Protocol Version   (1)
02         // HDR:BODYSTART
00000002   // Record Group Count (2)
00000198   // Record Groups Size (408)
// Record Group 1 (204)
	00000002   // Record Count      (2)
	000000c4   // Record Group Size (196)
	// Record Group 1, Record 1 (98 bytes)
		00000001   // Field/Value Count   (1)
		0000001e   // Record Size         (30)
		00000038   // Request Record Size (56)
		// Record Group 1, Record 1, Field/Value 1 (30 bytes)
			00000006                   // Field Name Size  (6)
			00000010                   // Field Value Size (16)
			646174614131               // "dataA1"
			3c6172626974726172792064   // "<arbitrary data>"
			6174613e
		// Record Group 1, Record 1 (REQUEST RECORD) (56 bytes)
			00000002   // Field/Value Count (2)
			00000030   // Record Size       (48)
			// Record Group 1, Record 1, Field/Value 1 (24 bytes)
				00000008           // Field Name Size  (8)
				00000008           // Field Value Size (8)
				6669656c64413141   // "fieldA1A"
				76616c7565413141   // "valueA1A"
			// Record Group 1, Record 1, Field/Value 2 (24 bytes)
				00000008           // Field Name Size  (8)
				00000008           // Field Value Size (8)
				6669656c64413142   // "fieldA1B"
				76616c7565413142   // "valueA1B"
	// Record Group 1, Record 2 (98 bytes)
		00000001   // Field/Value Count   (1)
		0000001e   // Record Size         (30)
		00000038   // Request Record Size (56)
		// Record Group 1, Record 2, Field/Value 1 (30 bytes)
			00000006                   // Field Name Size  (6)
			00000010                   // Field Value Size (16)
			646174614132               // "dataA2"
			3c6172626974726172792064   // "<arbitrary data>"
			6174613e
		// Record Group 1, Record 2 (REQUEST RECORD) (56 bytes)
			00000002   // Field/Value Count (2)
			00000030   // Record Size       (48)
			// Record Group 1, Record 2, Field/Value 1 (24 bytes)
				00000008           // Field Name Size  (8)
				00000008           // Field Value Size (8)
				6669656c64413241   // "fieldA2A"
				76616c7565413241   // "valueA2A"
			// Record Group 1, Record 2, Field/Value 2 (24 bytes)
				00000008           // Field Name Size  (8)
				00000008           // Field Value Size (8)
				6669656c64413242   // "fieldA2B"
				76616c7565413242   // "valueA2B"
// Record Group 2 (204)
	00000002   // Record Count      (2)
	000000c4   // Record Group Size (196)
	// Record Group 2, Record 1 (98 bytes)
		00000001   // Field/Value Count   (1)
		0000001e   // Record Size         (30)
		00000038   // Request Record Size (56)
		// Record Group 2, Record 1, Field/Value 1 (30 bytes)
			00000006                   // Field Name Size  (6)
			00000010                   // Field Value Size (16)
			646174614231               // "dataB1"
			3c6172626974726172792064   // "<arbitrary data>"
			6174613e
		// Record Group 2, Record 1 (REQUEST RECORD) (56 bytes)
			00000002   // Field/Value Count (2)
			00000030   // Record Size       (48)
			// Record Group 2, Record 1, Field/Value 1 (24 bytes)
				00000008           // Field Name Size  (8)
				00000008           // Field Value Size (8)
				6669656c64423141   // "fieldB1A"
				76616c7565423141   // "valueB1A"
			// Record Group 2, Record 1, Field/Value 2 (24 bytes)
				00000008           // Field Name Size  (8)
				00000008           // Field Value Size (8)
				6669656c64423142   // "fieldB1B"
				76616c7565423142   // "valueB1B"
	// Record Group 2, Record 2 (98 bytes)
		00000001   // Field/Value Count   (1)
		0000001e   // Record Size         (30)
		00000038   // Request Record Size (56)
		// Record Group 2, Record 2, Field/Value 1 (30 bytes)
			00000006                   // Field Name Size  (6)
			00000010                   // Field Value Size (16)
			646174614232               // "dataB2"
			3c6172626974726172792064   // "<arbitrary data>"
			6174613e
		// Record Group 2, Record 2 (REQUEST RECORD) (56 bytes)
			00000002   // Field/Value Count (2)
			00000030   // Record Size       (48)
			// Record Group 2, Record 2, Field/Value 1 (24 bytes)
				00000008           // Field Name Size  (8)
				00000008           // Field Value Size (8)
				6669656c64423241   // "fieldB2A"
				76616c7565423241   // "valueB2A"
			// Record Group 2, Record 2, Field/Value 2 (24 bytes)
				00000008           // Field Name Size  (8)
				00000008           // Field Value Size (8)
				6669656c64423242   // "fieldB2B"
				76616c7565423242   // "valueB2B"
03   // HDR:BODYEND
04   // HDR:MSGEND

Or, non-annotated:

061bae88bed2010000000102000000020000019800000002000000c4000000010000001e00000038
00000006000000106461746141313c61726269747261727920646174613e00000002000000300000
0008000000086669656c6441314176616c756541314100000008000000086669656c644131427661
6c7565413142000000010000001e0000003800000006000000106461746141323c61726269747261
727920646174613e000000020000003000000008000000086669656c6441324176616c7565413241
00000008000000086669656c6441324276616c756541324200000002000000c4000000010000001e
0000003800000006000000106461746142313c61726269747261727920646174613e000000020000
003000000008000000086669656c6442314176616c756542314100000008000000086669656c6442
314276616c7565423142000000010000001e0000003800000006000000106461746142323c617262
69747261727920646174613e000000020000003000000008000000086669656c6442324176616c75
6542324100000008000000086669656c6442324276616c75654232420304

1. Response messages only.
2. Optional for Request.
3. Required for Response.